Glazing Wedge Gaskets (Per Metre)
- Deceuninck
- WEDGE GG PM 1709
- In Stock
-
£1.50
- Exc. VAT: £1.25
Available Options
Our glazing seal wedge gasket comes in various colours according to its thickness. This type of glazing gasket is used in the installation of double glazed units. Over time these gaskets can shrink and become cracked giving a poor seal to your window. These gaskets are easy to install.
Glazing Wedge Gasket (per metre)
To identify your gasket: Remove a section of your old existing gasket and identify its colour. This will give you an indication of which size you gasket you may need. Now measure the gap between the glass unit and the window frame and this will give you the thickness you require. We always advise to purchase a wedge gasket sample pack if you are unsure of the size you require.
To install the gasket: Start from the corners and work your way round the window pushing the gasket into the gap between the glass and frame. You should not require glue to apply wedge gasket, if your gasket is popping out then you probably require a larger size.
Size Guide

SOLD PER METRE: for example, when placing your order - if you enter 1 in the 'Qty:' selection box, this equals 1 metre, entering 2 equals 2 metres, and so on....
Most are supplied as a continuous coil of up to 50m Max (Order over 50m will come in multiple rolls)
Please note: (If ordering per metre, Purple wedge gasket (7.2mm thickness) is only supplied up to a maximum of 25 metre lengths).
Due to the gasket being cut to size, these are classed as non-returnable items, this does not apply to full coils purchased in 20, 30, 40, 50 metres.
Disclaimer
All images are for reference purposes only and can show multiple dimensions of a single product so you can see the product from different angles. This does not usually mean the amount shown in the image is the amount you purchase. Where multiple items are shown please check the description as only one is usually supplied unless otherwise stated.